Complete tower inspection, without ever sending a team to climb — even on live lines.
We use drone-based inspection to perform a complete scan of transmission towers up to 765kV — capturing structural, thermal, and component-level detail safely from the air, without requiring a line shutdown.
Every critical component on the tower — not just a broad structural pass.
Categories checked
Insulator Strings
Cracks, flashovers, and surface contamination.
Arcing Horns
Damage and misalignment.
Jumpers & GW Jumpers
Connection integrity and overheating at jumpers and ground-wire jumpers.
Corona Control Rings
Damage or displacement.
Strain Clamps
Looseness and wear.
Vibration Dampers
Missing or damaged units.
Spacers
Condition and positioning.
Cross Arms
Structural integrity and corrosion.
Tower Body / Cage
Overall structural condition.
Foundation & Legs
Corrosion, cracks, and erosion.
Earthing, Signage & Fencing
Earthing wire continuity, plus anti-climb fencing, danger signs, and name boards — presence and condition.
Plus thermal scanning across all joints and connectors to catch overheating before it causes failure.
A structured process — from first flight to final report.
Steps
Route & Tower Mapping
We map out every tower along the line to be inspected and plan drone flight paths for complete coverage of each structure.
Live-Line Aerial Data Capture
Our DGCA-certified pilots fly around each tower — even on energised lines — capturing high-resolution thermal and visual imagery from multiple angles, with no need for a shutdown or outage.
Data Processing & Analysis
Captured data is processed to detect and classify anomalies — thermal and structural — each tagged with severity and exact tower and component location.
Reporting
You receive a structured, tower-wise report with geo-tagged findings, prioritized by severity. All data is also available on our web-based analytics portal, where you can view each tower's thermal images directly, check exact temperature readings, and review defect locations anytime.
One inspection — value for every stakeholder on site.
Teams served
For Utility Owners & Asset Managers
Get complete tower-level visibility without the time, cost, and risk of manual tower climbing — plan maintenance based on real data.
For O&M & Maintenance Teams
Get exact defect locations on every tower and component, so field teams can go straight to the problem instead of inspecting structures manually one by one.
For EPCs
Verify tower condition before handover and catch construction-stage defects early — avoiding disputes after commissioning.
Clear outcomes your team can act on.
- 01Complete, component-level tower scan — structural, thermal, and hardware condition
- 02Coverage for lines up to 765kV
- 03Live-line inspection — no shutdown or outage required
- 04DGCA-certified pilots for safe, compliant operations
- 05No manual tower climbing required
- 06Geo-tagged, severity-classified reports your team can act on immediately
- 07Portal access to view thermal images and exact temperature data for every tower
- 08Faster inspection cycles across multiple towers
Answers before you ask.
Still have a question about transmission line?
Get in touchNo. Our inspections are conducted on live, energised lines — there's no need for an outage or shutdown to get your towers inspected.
Complete tower visibility. Zero climbing. Zero shutdown.
Get accurate, component-level inspection of your transmission towers — up to 765kV, on live lines — in one pass.